Cisco Cisco ONS 15454 SONET Multiservice Provisioning Platform (MSPP) Guida Informativa

Pagina di 7
 
 
Product End-of-Life Notice 
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. 
Page 1 of 7 
End-of-Sale and End-of-Life Announcement for the Cisco 
ONS 15454E STM-64 Fixed Optics Cards 
EOL5831 
Cisco Systems
®
 announces the end-of-sale and end-of life dates for the Cisco ONS 
15454E STM-64 Fixed Optics Cards. The last day to order the Cisco ONS 15454E STM-
64 Fixed Optics Cards is July 30, 2008. Customers with active service contracts will 
continue to receive support from the Cisco Technical Assistance Center (TAC) as shown 
in Table 1 of the EoL bulletin. Table 1 describes the end-of-life milestones, definitions, 
and dates for the Cisco ONS 15454E STM-64 Fixed Optics Cards. Table 2 lists the 
product part numbers affected by this announcement. 
The Cisco ONS 15454E STM-64 XFP-based optics card provides a single XFP-based 
pluggable optics module with greater benefits than the fixed optics cards it replaces. It 
provides multiple-reach capabilities including intraoffice (IH), short-haul (SH), long-haul 
(LH), and ITU DWDM frequencies. Additionally, the I1-only card provides a cost-effective, 
fixed IH configuration to support first cost-sensitive installations where flexibility is not 
paramount. It offers more cost-effective sparing of XFPs versus fixed card alternatives, 
making it suitable for all metro applications between central offices, colocation offices, or 
enterprise and campus facilities with span lengths from 2 km to 80 km. It supports many 
user applications through plug-in devices and simplifies support for system changes. The 
STM-64 XFP card can carry concatenated payloads of VC-4, VC-4-2c, VC-4-4c, VC-4-8c, 
and VC-4-16c, as well as nonconcatenated payloads on an VC-4, VC-3, VC-12, and VC-
11 basis. In SONET applications, the card is software-provisionable to transport SDH 
payloads over SONET in the form of STS-Nc-concatenated payloads. The card port can 
be commissioned for use in unidirectional-path switched ring/subnetwork connection 
protection (UPSR/SNCP), 2-fiber and 4-fiber bidirectional line switched ring/multiplex 
section-shared protection ring (BLSR/MS-SPR), 1+1 automatic protection switching/line 
multiplex section protection (APS/LMSP), or path-protected mesh network (PPMN) 
architectures, providing the flexibility to build the type of networks required to meet service 
demands, traffic patterns, and user needs. The card supports in-service bandwidth 
upgrade capabilities from lower-speed cards, including the single-port STM-4, STM-16, 
and STM-64 cards, using the Cisco Transport Controller’s simple span-upgrade wizard.