Cisco Cisco Web Security Appliance S360
I R O N P O R T A S Y N C O S 6 . 5 F O R W E B R E L E A S E N O T E S - B E T A
63
No alerts for failed authentication servers
The Web Security appliance does not currently support alert messaging for failed
authentication servers. To manage the appliance during such an event, use the advanced
authentication settings to specify an action if the authentication server becomes unavailable.
This option is located on the Network > Authentication page. [Defect ID: 27887]
authentication servers. To manage the appliance during such an event, use the advanced
authentication settings to specify an action if the authentication server becomes unavailable.
This option is located on the Network > Authentication page. [Defect ID: 27887]
System reports false hard disk failure
Transient reports of hard disk failures might be erroneous. Performing a same drive hot swap
resets the RAID firmware and likely resolves this issue. [Defect ID: 28821]
resets the RAID firmware and likely resolves this issue. [Defect ID: 28821]
Issue with temperature alerts
The system health daemon fails to send alerts when the environmental temperature reaches
critical levels. To prevent disk failure due to high temperatures, power down the appliance
before the ambient air temperature reaches 95 degrees Fahrenheit. [Defect ID: 28958]
critical levels. To prevent disk failure due to high temperatures, power down the appliance
before the ambient air temperature reaches 95 degrees Fahrenheit. [Defect ID: 28958]
LDAP uses M1 management interface
Currently, all LDAP traffic is restricted to the M1 management interface. For this limitation,
and any other LDAP-related issue, please contact IronPort Customer Support.
and any other LDAP-related issue, please contact IronPort Customer Support.
Using Internet Root DNS servers for DNS lookups fails to resolve local hostnames
When you configure the Web Security appliance to use Internet Root DNS servers for DNS
lookups, it fails to resolve machine names for local hostnames, such as the appliance or
Active Directory server host names.
lookups, it fails to resolve machine names for local hostnames, such as the appliance or
Active Directory server host names.
Workaround: Fix the DNS or add the appropriate static entries to the local DNS using the
Command Line Interface. [Defect ID: 30703]
Command Line Interface. [Defect ID: 30703]
Blocking DOS executable object types blocks updates for Windows OneCare
When you configure the Web Security appliance to block DOS executable object types, the
appliance also blocks updates for Windows OneCare. [Defect ID: 31935]
appliance also blocks updates for Windows OneCare. [Defect ID: 31935]
Changing system time on Web Security appliance causes blank reports
When you change the time or date on the System Administration > Time Settings page and
then view the Monitor > Overview page, the reports display “No data was found in the
selected time range.”
then view the Monitor > Overview page, the reports display “No data was found in the
selected time range.”
Workaround: Reboot the Web Security appliance. [Defect ID: 32127]