Cisco Cisco VC220 Dome Network Camera Manuale Di Manutenzione
Troubleshooting
Questions and Answers
VC 220 Dome WDR Day/Night PoE Network Camera Administration Guide
102
A
Q.
How can I find out my camera’s IP address?
By default, the camera automatically receives a DHCP IP address. To
identify the IP address, you can do the following procedure:
identify the IP address, you can do the following procedure:
STEP 1
On a computer connected to your router go to Start > Run.
STEP 2
Type cmd window.
STEP 3
At command line, type ipconfig.
STEP 4
Look for Default Gateway. This is your LAN router’s ip address
STEP 5
In a web browser, login to your router by typing the router’s IP address.
STEP 6
Each router shows the IP address differently.
•
Look for a DHCP client table that lists DHCP IP addresses. It can be found on
the Summary, Status > LAN, or DHCP page.
the Summary, Status > LAN, or DHCP page.
•
Look for your camera’s MAC address. The camera’s IP address should be
next to your MAC address.
next to your MAC address.