Cisco Cisco VC220 Dome Network Camera Manuale Di Manutenzione
Configuring the Cisco VC 220 Network Camera Software
Applications > Servers
VC 220 Dome WDR Day/Night PoE Network Camera Administration Guide
67
6
Instant Message (IM Server)
Complete the IM server section if you want an alert sent to an IM address when
motion detection is triggered.
motion detection is triggered.
•
Server name—Enter a descriptive name for your IM server.
•
Server address—Enter the domain name or IP address of the IM server.
•
Jabber ID—Enter the Instant Message (IM) user ID that the Cisco VC 220
camera should use to log in.
camera should use to log in.
•
Password—Enter the password of the IM account. A password is only
required if your IM account requires authentication.
required if your IM account requires authentication.
•
Send to—Enter the address where the alert IM should be sent.
•
Server port—By default, the IM port is set to 5222. It can be assigned a
different port number between 1024 and 65535.
different port number between 1024 and 65535.