Cisco Cisco VC220 Dome Network Camera Manuale Di Manutenzione
Sample Configurations for the Cisco VC 220 Network Camera
Configuring Motion Detection with Email Notification
VC 220 Dome WDR Day/Night PoE Network Camera Administration Guide
92
8
Configuring Motion Detection with Email Notification
When configuring motion detection, once an action is detected, you may want to
be advised by email. The following steps are required to set up an email
notification system:
be advised by email. The following steps are required to set up an email
notification system:
1. Define your video parameters for each stream
2. Define your SMTP email server
3. Configure motion detection
4. Configure your media settings
5. Configure your event settings
STEP 1
Define your media as either MPEG-4 or MJPEG for each stream. See
about the differences between MPEG-4 and MJPEG.
STEP 2
Configure your SMTP email server.
a. Access the setup options for your Cisco VC 220 network camera by clicking
Setup.
b. Go to the Applications > Servers page.
c. In the SMTP Server tab, enter the SMTP server name or the IP address and
port number of the SMTP server. An account name and password are only
required if your mail server requires authentication.
required if your mail server requires authentication.