Cisco Headend System Release 2.7 Guida All'Installazione
Verify DBDS Stability
4013154 Rev C
21
Verify DBDS Stability
Verifying DBDS Stability
1 Complete these steps to perform a slow and fast boot on a test DHCT with a
working return path (2-way mode).
a Boot a DHCT.
a Boot a DHCT.
Note: Do not press the Power button.
b Access the Power On Self Test and Boot Status diagnostic screen on the
DHCT and verify that all parameters, except UNcfg, display Ready. UNcfg
displays Broadcast.
displays Broadcast.
Note: The fields on this screen may take 1-2 minutes to completely populate
with data.
with data.
c Press the Power button on the DHCT to turn on the power and establish a
two-way network connection.
d Access the Power On Self Test and Boot Status diagnostic screen on the
DHCT and verify that all parameters, including UNcfg, display Ready.
2 Verify that you can ping the test DHCT.
3 Stage at least one new DHCT. After staging the DHCT, verify the following:
3 Stage at least one new DHCT. After staging the DHCT, verify the following:
The DHCT loaded the current client release software.
The DHCT received at least 33 EMMs (Entitlement Management Messages).
The DHCT successfully received its Entitlement Agent.
4 Verify that the Interactive Program Guide (IPG) displays 7 days of valid and
accurate data.
5 Verify the pay-per-view (PPV) barkers appear on the PPV channels correctly.
6 Verify that all third-party applications have loaded and operate properly.
7 Verify that you can purchase a video-on-demand and /or xOD program.
6 Verify that all third-party applications have loaded and operate properly.
7 Verify that you can purchase a video-on-demand and /or xOD program.