Cisco Cisco TelePresence MX700 Guida Utente

D1507601 User Guide
Cisco TelePresence MX300 G2
Produced: November 2013 for TC7.0
All contents © 2010–2013
Cisco Systems, Inc. All rights reserved.

The maximum number of participants

in a Multiway conference depends
entirely on the video infrastructure
implemented in your organization. If
in doubt, consult your video support
team.

If you want to initiate a video
conference, you must call each
participant one by one.

Call settings. Those you call may
have video systems with different
capabilities. One of them may, for
example, be on an ADSL system
with limited bandwidth (compared
to the others). You may then set the

Call settings to a (normally lower)

call rate (bandwidth) suiting his
or her system before you call that
person. However, that call rate will
affect that specific part of the video
conference only. Other participants
will not suffer from a lower call rate
because of this.

Video conferencing

Calling more than one using Multiway or CUCM

This is an optional feature that may, or may not, be installed on your system.

About Multiway/CUCM

Assume that

you already

are in a call.

This call may have

been initiated by you or by

someone else (someone have

called you). Tap Add.

Locate whom to call.

Place the call in the

usual way.

Tap Merge to create

a conference, as

outlined.

It may take a short while to

create the conference.

To add more participants repeat

the procedure. The maximum

number of participants depends on

your video system infrastructure.

If in doubt consult your video

support team.
If you initiated the conference you

will be able to terminate the entire

conference as well. The other

participants, however, may only

disconnect themselves from the

conference.