Cisco Cisco TelePresence MX700 Riferimenti tecnici
D15335.04
Cisco TelePresence MX700 and MX800 API Reference Guide CE8.2, JUNE 2016.
Copyright © 2016 Cisco Systems, Inc. All rights reserved.
55
Cisco TelePresence MX700 and MX800
API Reference Guide
Cameras configuration
xConfiguration Cameras Camera [1..7] AssignedSerialNumber
The camera ID is the number n in Camera [n]. By default, the camera ID is assigned automati-
cally to a camera. If EDID information is not passed on from the camera to the codec, the
camera ID is not persistent after a reboot. This means that a camera may get a new camera ID
when the codec (video system) is restarted.
You should use the Cameras Camera AssignedSerialNumber setting to cater for configurations
where the codec does not receive EDID information from multiple cameras. This setting allows
you to manually assign a camera ID to a camera by associating the camera ID with the camera's
serial number. The setting is persistent until the codec is factory reset.
Typical situations where the codec does not receive EDID information are: when you connect
a Cisco TelePresence 60 camera using 3G-SDI; when you connect a Cisco TelePresence 60
(Cisco PrecisionHD 1080p4xS2) camera; when you use an HDMI repeater that does not pass
on EDID information.
The default value is an empty string.
Requires user role: ADMIN, USER
Default value: ""
Default value: ""
USAGE:
xConfiguration Cameras Camera
n
AssignedSerialNumber: "
AssignedSerialNumber
"
where
n
: Unique ID that identifies the camera. Range: 1..7
AssignedSerialNumber
: String (0, 20)
The camera's serial number.
xConfiguration Cameras Camera [1..7] Backlight DefaultMode
This configuration turns backlight compensation on or off. Backlight compensation is useful
when there is much light behind the persons in the room. Without compensation the persons
will easily appear very dark to the far end.
Requires user role: ADMIN, USER
Default value: Off
Default value: Off
USAGE:
xConfiguration Cameras Camera
n
Backlight DefaultMode:
DefaultMode
where
n
: Unique ID that identifies the camera. Range: 1..7
DefaultMode
: Off/On
Off: Turn off the camera backlight compensation.
On: Turn on the camera backlight compensation.
On: Turn on the camera backlight compensation.
xConfiguration Cameras Camera [1..7] Brightness Mode
Define the camera brightness mode.
Requires user role: ADMIN, USER
Default value: Auto
Default value: Auto
USAGE:
xConfiguration Cameras Camera
n
Brightness Mode:
Mode
where
n
: Unique ID that identifies the camera. Range: 1..7
Mode
: Auto/Manual
Auto: The camera brightness is automatically set by the system.
Manual: Enable manual control of the camera brightness. The brightness level is set
using the Cameras Camera [n] Brightness DefaultLevel setting.
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus
xConfiguration