Cisco Cisco TelePresence MX700 Riferimenti tecnici
D15335.04
Cisco TelePresence MX700 and MX800 API Reference Guide CE8.2, JUNE 2016.
Copyright © 2016 Cisco Systems, Inc. All rights reserved.
80
Cisco TelePresence MX700 and MX800
API Reference Guide
xConfiguration NetworkServices Telnet Mode
Telnet is a network protocol used on the Internet or Local Area Network (LAN) connections.
Requires user role: ADMIN
Default value: Off
Default value: Off
USAGE:
xConfiguration NetworkServices Telnet Mode:
Mode
where
Mode
: Off/On
Off: The Telnet protocol is disabled. This is the factory setting.
On: The Telnet protocol is enabled.
Off: The Telnet protocol is disabled. This is the factory setting.
On: The Telnet protocol is enabled.
xConfiguration NetworkServices WelcomeText
Choose which information the user should see when logging on to the codec through Telnet/
SSH.
Requires user role: ADMIN
Default value: On
Default value: On
USAGE:
xConfiguration NetworkServices WelcomeText:
WelcomeText
where
WelcomeText
: Off/On
Off: The welcome text is: Login successful
On: The welcome text is: Welcome to <system name>; Software version; Software
On: The welcome text is: Welcome to <system name>; Software version; Software
release date; Login successful.
Peripherals configuration
xConfiguration Peripherals Profile Cameras
Define the number of cameras that are expected to be connected to the video system. This
information is used by the video system's diagnostics service. If the number of connected
cameras does not match this setting, the diagnostics service will report it as an inconsistency.
Requires user role: ADMIN
Default value: Minimum1
Default value: Minimum1
USAGE:
xConfiguration Peripherals Profile Cameras:
Cameras
where
Cameras
: NotSet/Minimum1/0/1/2/3/4/5/6/7
NotSet: No camera check is performed.
Minimum1: At least one camera should be connected to the video system.
0-7: Select the number of cameras that are expected to be connected to the video
Minimum1: At least one camera should be connected to the video system.
0-7: Select the number of cameras that are expected to be connected to the video
system.
xConfiguration Peripherals Profile TouchPanels
Define the number of touch panels that are expected to be connected to the video system.
This information is used by the video system's diagnostics service. If the number of connected
touch panels does not match this setting, the diagnostics service will report it as an inconsis-
tency. Note that only one Cisco Touch controller is supported in this version.
Requires user role: ADMIN
Default value: Minimum1
Default value: Minimum1
USAGE:
xConfiguration Peripherals Profile TouchPanels:
TouchPanels
where
TouchPanels
: NotSet/Minimum1/0/1/2/3/4/5
NotSet: No touch panel check is performed.
Minimum1: At least one touch panel should be connected to the video system.
0-5: Select the number of Touch controllers that are expected to be connected to the
Minimum1: At least one touch panel should be connected to the video system.
0-5: Select the number of Touch controllers that are expected to be connected to the
video system.
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus
xConfiguration