Cisco Cisco TelePresence MX700 Riferimenti tecnici
D15335.04
Cisco TelePresence MX700 and MX800 API Reference Guide CE8.2, JUNE 2016.
Copyright © 2016 Cisco Systems, Inc. All rights reserved.
98
Cisco TelePresence MX700 and MX800
API Reference Guide
Video configuration
xConfiguration Video DefaultMainSource
Define which video input source shall be used as the main video source.
Requires user role: ADMIN, USER
Default value: 1
Default value: 1
USAGE:
xConfiguration Video DefaultMainSource:
DefaultMainSource
where
DefaultMainSource
: 1/2/3/4
Set the source to be used as the main video source.
xConfiguration Video Input Connector [1..5] CameraControl Mode
Define whether the camera that is connected to this video input connector can be controlled or
not.
Note that camera control is not available for Connector 5 (S-video/Composite).
Note that camera control is not available for Connector 5 (S-video/Composite).
Requires user role: ADMIN
Default value: Connector 1, 2, 3: On Connector 4, 5: Off
Default value: Connector 1, 2, 3: On Connector 4, 5: Off
USAGE:
xConfiguration Video Input Connector
n
CameraControl Mode:
Mode
where
n
: Unique ID that identifies the video input connector. Range: 1..5
Mode
: Connector 1, 2, 3, 4: Off/On Connector 5: Off
Off: Disable camera control.
On: Enable camera control.
Off: Disable camera control.
On: Enable camera control.
xConfiguration Video Input Connector [1..5] CameraControl CameraId
The camera ID is a unique identifier of the cameras that are connected to the video input. Use
the xStatus Camera API command to see the IDs of the different cameras.
Requires user role: ADMIN
Default value: Connector n: n Connector 5: 1
Default value: Connector n: n Connector 5: 1
USAGE:
xConfiguration Video Input Connector
n
CameraControl CameraId:
CameraId
where
n
: Unique ID that identifies the video input connector. Range: 1..5
CameraId
: Connector 1, 2, 3, 4: 1/2/3/4/5/6/7 Connector 5: 1
Select the ID of the camera.
xConfiguration Video Input Connector [1..5] InputSourceType
Select which type of input source is connected to the video input.
Requires user role: ADMIN
Default value: Connector 1 and 2: camera Connector 3 and 4: PC Connector 5: other
Default value: Connector 1 and 2: camera Connector 3 and 4: PC Connector 5: other
USAGE:
xConfiguration Video Input Connector
n
InputSourceType:
InputSourceType
where
n
: Unique ID that identifies the video input connector. Range: 1..5
InputSourceType
: camera/desktop/document_camera/mediaplayer/PC/whiteboard/other
camera: Use this when a camera is connected to the video input.
desktop: Use this when the video system's monitor is the main screen for the
desktop: Use this when the video system's monitor is the main screen for the
PC / laptop that is connected to this input. The Video Input Connector [n]
PresentationSelection setting must then also be set to desktop.
document_camera: Use this when a document camera is connected to the video input.
mediaplayer: Use this when a media player is connected to the video input.
mediaplayer: Use this when a media player is connected to the video input.
PC: Use this when a computer is connected to the video input.
whiteboard: Use this when a whiteboard camera is connected to the video input.
whiteboard: Use this when a whiteboard camera is connected to the video input.
other: Use this when the other options do not match.
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus
xConfiguration