Cisco Cisco TelePresence MX700 Manuale Di Manutenzione

D14850.03 MX Series Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2011-2012 Cisco Systems, Inc. All rights reserved. 

www.cisco.com

38

Conference [1..1] VideoBandwidth PresentationChannel Weight

The available transmit video bandwidth is distributed on the main channel and presentation 

channel according to "MainChannel Weight" and "PresentationChannel Weight". If the main 

channel weight is 2 and the presentation channel weight is 1, then the main channel will use 

twice as much bandwidth as the presentation channel.
Requires user role: ADMIN
Value space: <1..10>

Range: 1 to 10.

Example: Conference 1 VideoBandwidth PresentationChannel Weight: 5

Conference [1..1] PacketLossResilience Mode

Set the packetloss resilience mode. This configuration will only take effect for calls initiated after 

the configuration is set.
Requires user role: ADMIN
Value space: <On/Off>

On: Enable the packetloss resilience.
Off: Disable the packetloss resilience.

Example: Conference 1 PacketLossResilience Mode: On

Conference [1..1] Presentation Policy

Control how the presentation service is to be performed.
Requires user role: ADMIN
Value space: <LocalRemote/LocalOnly>

LocalRemote: The presentation will be shown locally and sent to remote side.
LocalOnly: The presentation will only be shown locally.

Example: Conference 1 Presentation Policy: LocalRemote

Conference [1..1] Multipoint Mode

Define how the video system handles multipoint video conferences. MultiWay requires that 

your video network includes an external Multipoint control unit (MCU), which let you set up 

conferences with many participants.
Requires user role: ADMIN
Value space: <Off/MultiWay/Auto>

Off: Multipoint conferences are not allowed.
MultiWay: Use MultiWay for multipoint conferences. The Multipoint Mode will be set to 

Off automatically if the MultiWay service is unavailable, e.g.  when a server address is not 

specified in the NetworkServices MultiWay Address setting.
Auto: Use MultiWay for multipoint conferences if the MultiWay service is available. If not, the 

multipoint mode is set to Off automatically.

Example: Conference 1 Multipoint Mode: Auto

Conference [1..1] IncomingMultisiteCall Mode

Select whether or not to allow incoming calls when already in a call/conference.
Requires user role: ADMIN
Value space: <Allow/Deny>

Allow: You will be notified when someone calls you while you are already in a call. You can 

accept the incoming call or not. The ongoing call may be put on hold while answering the 

incoming call; or you may merge the calls (requires MultiSite or MultiWay support).
Deny: An incoming call will be rejected if you are already in a call. You will not be notified 

about the incoming call. However, the call will appear as a missed call in the call history list.

Example: Conference 1 IncomingMultisiteCall Mode: Allow

Introduction

Table of contents

Web interface

Advanced settings

Appendices

Advanced settings