Cisco Cisco Unified MeetingPlace Audio Server Guida Alla Risoluzione Dei Problemi

Introduction
 Prerequisites
      Requirements
      Components Used
      Conventions
 Unique Meeting ID Location Methods
      Find the Unique Meeting ID with Cisco MeetingTime
      Find the Unique Meeting ID with the CLI
 Related Information

This document explains how to find the unique meeting ID of a meeting on the Cisco MeetingPlace Server.

There are no specific requirements for this document.

The information in this document is based on the MeetingPlace Server Software, all versions.

The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.

For more information on document conventions, refer to the Cisco Technical Tips Conventions.

There are two methods by which you can find the unique meeting ID of a meeting. The first method is
through Cisco MeetingTime, and the second method is through the command−line interface (CLI). If you are
not familiar with the MeetingPlace Server CLI, use the MeetingTime method.

In order to use this method, you must have a system manager profile on the MeetingPlace system.

Complete these steps:

Log in to MeetingTime with a system manager profile.

1.