Cisco Cisco UCS C22 M3 Rack Server Guida Alla Risoluzione Dei Problemi

This document describes the procedure to add new hard drives to an existing Virtual Drives (VD)
with and without Redundant Array of Independent Disks (RAID) change.

For instance if you have a VD which has three Hard drives and you want to add three more, the
procedure to do so is mentioned in this document.

There are no specific requirements for this document.

The information in this document is based on Cisco UCS-C Servers.

The information in this document was created from the devices in a specific lab environment. All of
the devices used in this document started with a cleared (default) configuration. If your network is
live, make sure that you understand the potential impact of any command.

 This sections contains the steps to add new hard drive to an existing VD.

Note: You would need to perform the above Procedure task in a Maintainence Window.

Step 1. Reboot the host into webBIOS

When the host computer is booting, this text appears:

Copyright© LSI Corporation

Press <Ctrl><H> for WebBIOS