Cisco Cisco Wireless LAN Controller Module Dépliant
Note: Before you configure MAC authentication, you must configure the WLC for basic operation
and register the LAPs to the WLC. This document assumes that the WLC is already configured for
basic operation and that the LAPs are registered to the WLC. If you are a new user trying to set up the
WLC for basic operation with LAPs, refer to Lightweight AP (LAP) Registration to a Wireless LAN
Controller (WLC).
and register the LAPs to the WLC. This document assumes that the WLC is already configured for
basic operation and that the LAPs are registered to the WLC. If you are a new user trying to set up the
WLC for basic operation with LAPs, refer to Lightweight AP (LAP) Registration to a Wireless LAN
Controller (WLC).
Note: There is no special configuration needed on the wireless client in order to support MAC
authentication.
authentication.
Configure a WLAN and Enable MAC Filtering
Complete these steps in order to configure a WLAN with MAC filtering:
Click WLANs from the controller GUI in order to create a WLAN.
The WLANs window appears. This window lists the WLANs configured on the controller.
1.
Click New in order to configure a new WLAN.
In this example, the WLAN is named MAC−WLAN and the WLAN ID is 1.
2.
Click Apply.
3.
In the WLAN > Edit window, define the parameters specific to the WLAN.
4.