Cisco Cisco Content Switching Module Manuale Tecnico

CSM and SSL Services Module Initial
Configuration Example

Document ID: 44684

Contents

Introduction
Prerequisites
Requirements
Components Used
Conventions
Configure
Network Diagram
Configurations
Verify
Troubleshoot
Related Information

Introduction

This document provides a sample configuration for configuring the Content Switching Module (CSM) with
Secure Socket Layer (SSL).

Prerequisites

Requirements

There are no specific requirements for this document.

Components Used

The information in this document is based on these software and hardware versions:

Cisco 7202 router running Cisco IOS

12.1

•

Cisco Catalyst 6509 running IOS 12.1

•

CSM with SSL Termination Engine (STE) feature set running IOS 12.2(11) and SSL(0.86)

•

Cisco 7606 Router running IOS 12.1

•

CSM Build 3.1(0.119)

•

The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.

Conventions

For more information on document conventions, refer to the Cisco Technical Tips Conventions.