Integral INSSD128GP25MXZ Manuale Utente
11
3. The delay from the activation of FIOR- or DIOW- until the state of IORDY is first
sampled. If IORDY is inactive then the host shall wait until IORDY is active
before the PIO cycle is complete. If the device is not driving IORDY negated at
before the PIO cycle is complete. If the device is not driving IORDY negated at
the t
A
after the activation of DIOR-
or DIOW-, that t
5
shall be met and t
RD
is not applicable. If the device is driving
IORDY
negated at the time t
A
after the activation of DIOR- or DIOW-, then tRD shall be
met and t
5
is not applicable.
4. Mode may be selected at the highest mode for the device if CS(1:0) and DA(2:0)
do not change between read or write cycle or selects at the highest mode
supported by the slowest device if CS(1:0) and DA(2:0) do change between read
or write cycles.
supported by the slowest device if CS(1:0) and DA(2:0) do change between read
or write cycles.
3.3.2 Multiword DMA Data Transfer
(Initialing a Multiword DMA data burst)