Cisco Cisco ScanSafe Wi-Fi Hotspot Security Dépliant
© 2015 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 4 of 10
Step 1. Log on to a client computer inside your network.
Step 2. If using Windows, click Control Panel and go to Programs and Features.
Step 3. Click Turn on Windows features on or off. Scroll down the list of available features until you find the Telnet
Client. Check the box and click OK. Now that the Telnet Client is installed, you can resume the test.
Step 4. Open the command-line window and type the command
telnet [tower IP address] 8080. A
successful connection is noted by a blank screen and blinking cursor.
Create Authentication License Key
Reference video:
Step 1. Log on to the Cisco Cloud Web Security portal at
Step 2. From the Admin tab, put your mouse over Authentication and select the key that you want to generate.
The options are Company Key and Group Key. To have a single key for all users in the company (can
be used in various Connectors), AnyConnect
be used in various Connectors), AnyConnect
®
Secure Mobility Client, or a mixture of all, select Company
Key.
Step 3. Note that no Company Key currently exists in this account. Click Create Key to create the Company Key.
If one already exists and you don’t know the entire string (only the last four characters will be seen), then
you need to revoke it before you can create a new one. Also, if the existing Company Key is in use
anywhere (Connectors or the AnyConnect client), you must replace it with the new one.
you need to revoke it before you can create a new one. Also, if the existing Company Key is in use
anywhere (Connectors or the AnyConnect client), you must replace it with the new one.
Step 4. The key is active immediately. The email option that follows is only for the admin to have a backup of the
key. Note: After you navigate away from the page,
you’ll no longer see the complete string of the key.
(Going forward, only the last 4 characters will be displayed.).
Step 5. Copy the entire alphanumeric string in the Authentication Key field and record it in a document that will
be backed up.
* Note: The second option is to create a group key by selecting Group Key under Authentication. To create a
group key, you may use an existing directory group, or you may create a custom group under Admin >
Management > Groups.
Step 6. Click Create Key, which corresponds to the group for which you are creating a key.
Download WSAv
Step 1. Download WSAv
Step 2. Unzip the image you downloaded.
Install the WSAv Image
Step 1. Run VMware Fusion.
Step 2. Navigate to File > Import > Choose File.
Step 3. Select.ovf file.
Step 4. Click Open > Continue.
Step 5. Save as suggested (for example, coeus-8-0-5-075-S100V).
Step 6. Wait while the importing completes, then click Finish.