Cisco Acano X-series Guida Dello Sviluppatore
Cisco Meeting Server Release 2.0 : MMP Command Line Reference
39
Command/Examples
Description/Notes
turn certs <keyfile> <certificate file>
[<cert-bundle>]
[<cert-bundle>]
Defines the name of the private key file and .crt file for
the
Turn Server application and, optionally, a CA
certificate bundle as provided by your CA. (Also see
the section
the
Turn Server application and, optionally, a CA
certificate bundle as provided by your CA. (Also see
the section
.)
turn certs none
Removes certificate configuration
turn (enable|disable)
Enables or disables the TURN server
turn credentials <username> <password>
<realm>
<realm>
turn credentials myusername mypassword
example.com
Sets the credentials for the TURN server
turn public-ip <public ip>
Sets up a public IP address for the TURN server
turn delete public-ip
Deletes the TURN server public IP address
8.7 SIP Edge Commands (BETA feature)
Note: SIP and Lync call traversal is a beta feature, only use in a test environment, do not use in a
production environment.
production environment.
The SIP Edge component provides support for traversal of local firewalls for SIP endpoints and
Lync calls in split server deployments. The Call Bridge uses a TURN server within the Meeting
Server to traverse the local firewall and send the SIP signal via a new SIP Edge component. Refer
to the deployment guides for the steps in setting up SIP and Lync call traversal in a test
environment.
Lync calls in split server deployments. The Call Bridge uses a TURN server within the Meeting
Server to traverse the local firewall and send the SIP signal via a new SIP Edge component. Refer
to the deployment guides for the steps in setting up SIP and Lync call traversal in a test
environment.
The MMP commands to configure the SIP Edge component are listed in the table below.
Command/Examples
Description/Notes
callbridge add edge <ip address>:<port>
Adds the SIP Edge for the Call Bridge to use.
callbridge del edge
Removes the SIP Edge
callbridge trust edge <certificate file>
Specify a certificate for the Call Bridge to trust for
connections to and from the SIP Edge. This is the
certificate of the SIP Edge.
connections to and from the SIP Edge. This is the
certificate of the SIP Edge.
sipedge private <interface>:<port>
Specify the internal interface and port for connections
to and from the Call Bridge
to and from the Call Bridge
sipedge public <interface>:<port>
Specify the external interface and port for
connections to and from external systems
connections to and from external systems
8 Application Configuration Commands