Brother HL-4000CN Guida All'Installazione
OFF ON
OFF ON
OFF ON
8
Click the Finish button.
The setup is now
The setup is now
complete.
*
1
*
1 Please follow the steps below when the printer is not set as the default printer.
Step 5 Connect the Printer to Your PC and Install the Driver
Step 5 Install the Driver and Connect the Printer to Your PC
Steps 1 to 4 Follow these steps in the Quick Setup Guide first.
Note: Setting Your Printer as the Default Printer
(For Windows
®
2000/XP Users Only)
For
Parallel
Interface Cable Users Only
Note: When the “Add New Hardware Wizard” appears
on your PC, click the Cancel button.
on your PC, click the Cancel button.
Note: Make sure the USB interface cable is NOT
connected to the printer, and then begin installing the
driver. If you have already connected the cable,
remove it.
connected to the printer, and then begin installing the
driver. If you have already connected the cable,
remove it.
1
Click Start, Settings and Printers.
2
Select the Brother HL-4000CN icon.
3
From the File menu, select
Set as Default printer.
Set as Default printer.
7
When this screen appears, make sure the printer power switch is on.
Connect the USB interface cable to your PC, and then connect it to the printer.
Click the Next button.
Connect the USB interface cable to your PC, and then connect it to the printer.
Click the Next button.
For
USB
Interface Cable Users Only
3
Select “PCL Driver (default A4)”
or “PCL Driver (default Letter).”
or “PCL Driver (default Letter).”
2
Click the Install Software
icon on the Menu screen.
icon on the Menu screen.
4
Click the Next button.
Follow the instructions on
the screen.
Follow the instructions on
the screen.
1
Insert the CD-ROM into your CD-ROM drive.
The opening screen will appear automatically.
Follow the instructions on the screen.
The opening screen will appear automatically.
Follow the instructions on the screen.
5
Select “Standard Installation,”
and then click the Next button.
and then click the Next button.
6
Select “Local Printer with
USB cable,” and then click
the Next button.
USB cable,” and then click
the Next button.
1
Turn off the printer power switch.
2
Connect the parallel interface cable to your PC,
and then connect it to the printer.
and then connect it to the printer.
3
Turn on the printer
power switch.
power switch.
4
Insert the CD-ROM into your CD-ROM drive.
The opening screen will appear automatically.
Follow the instructions on the screen.
The opening screen will appear automatically.
Follow the instructions on the screen.
5
Click the Install Software icon on
the Menu screen.
the Menu screen.
Note: If the “Add New Hardware Wizard”
appears on your PC, click the Cancel
button.
appears on your PC, click the Cancel
button.
8
Select “Standard Installation,” and
then click the Next button.
then click the Next button.
7
Click the Next button.
6
Select “PCL Driver (default
A4)” or “PCL Driver (default
Letter).”
A4)” or “PCL Driver (default
Letter).”
9
Select “Local Printer,” and
then click the Next button.
then click the Next button.
10
Select the port where your printer is
connected, and then click the Next
button.
connected, and then click the Next
button.
11
Click the Finish button.
The setup is now complete.
The setup is now complete.
Follow the instructions in this guide for your interface cable.
©2002 Brother Industries, Ltd. ©1998-2002 TROY XCD Inc. ALL RIGHTS RESERVED
Windows and Windows NT are registered trademarks of Microsoft Corporation in the U.S. and other countries. HP and HP/UX are trademarks of Hewllet-Packard Company. UNIX is a trademark of UNIX
Systems Laboratories. Adobe PostScript and PostScript3 are trademarks of Adobe Systems Incorporated. Netware is a trademark of Novell, Inc.
All other brand and product names mentioned in this guide are registered trademarks of their respective companies.
Windows and Windows NT are registered trademarks of Microsoft Corporation in the U.S. and other countries. HP and HP/UX are trademarks of Hewllet-Packard Company. UNIX is a trademark of UNIX
Systems Laboratories. Adobe PostScript and PostScript3 are trademarks of Adobe Systems Incorporated. Netware is a trademark of Novell, Inc.
All other brand and product names mentioned in this guide are registered trademarks of their respective companies.
Driver Installation Guide
Windows
®
For non-Network Users
Control Panel
Lights when the printer is ready to print.
Blinks when the printer is receiving data.
Lights when the printer has a problem.
Blinks when the printer has a problem that the user cannot rectify. Contact your dealer or Brother authorized service representative.
Lights when the printer has paper jams. Open the front cover with the indicated button to clear the jamed paper.
Print screen mode
Go back to the menu screen mode.
N/A
N/A
Force the remaining print data to be output.
Cancel printing.
Ready (Green)
Alarm (Red)
LEDs
Buttons
Menu
Form Feed / Set
Job Cancel / Back
Menu screen mode
Close the menu screen mode and switch to the print screen mode.
Scroll through menus and menu items.
Moves the displayed menu one level down.
Moves the displayed menu one level up.
Select menus and menu items.
Moves the displayed menu one level down.
Sets the displayed parameter.
Moves the displayed menu one level up.
Display
LED indicators
Buttons
Language Setting (Default is English):
When you want to change the language of the control panel message, refer to “Setting
Your Language on the Control Panel” in the Network Quick Setup Guide (the reverse
side of the Quick Setup Guide).
For more information, see “CONTROL PANEL” in chapter 5 of the User’s Guide on the
supplied CD-ROM.
Windows
®
Windows
®