Cisco Cisco Digital Media Player 4300G Guida All'Installazione

Do not use AES encryption with WPA or WPA2. It will fail. In Cisco DMS releases 5.2.x and 5.3.x, our 
DMP kernel supports only TKIP encryption with WPA and WPA2. (CSCty48753) 

When you see the EAP list, choose from it either FAST, MD5, or PEAP (ver.0).

When you see the Username and Password fields, enter in them respectively a valid username 
for your wireless network and the password for that username.

Choose Enabled from the Dynamic IP Addressing (DHCP) list.

Will you ever deploy your DMP in a wireless network that does not have any DHCP server? If so, this guide can 
tell you how to configure a static IP address on your DMP.

Click Probe to check whether these settings work correctly with your wireless network.

When you are satisfied with your choices, Click Select.

Click Save Configuration in the Administration list, and then click Save.

Disconnect the Ethernet cable from your DMP.

Click Restart DMP in the Administration list, and then click Restart.

Stop. You have completed this procedure.

Complete this optional procedure at your discretion. It explains what to do when a DMP’s ultimate deployment site does not 
use DHCP.

Obtain an Ethernet crossover cable.

Do one of the following.

Transport your DMP to a site where the local network segment includes a DHCP server and 
ensure that you have access there to a web browser.

Configure any system at your current location to run temporarily as a DHCP server and ensure 
that you have access to a web browser.