Cisco Cisco RF Gateway 1

Pagina di 16
 
 
Cisco RF Gateway 1 Software 
Release Notes, Release 3.01.06 
 
Overview 
Introduction 
The Cisco RF Gateway 1 software version 3.01.06 provides IGMP-related 
enhancements to the 3.00.X code base, and fixes a synchronization issue in the 
interleaver logic that potentially results in an impairment, or spike, present on 
several RF channels. In SDV systems, 3.01.06 also provides a change in behavior 
between the RF Gateway 1 and the USRM when a bad card is detected.  
The 3.X code provides double the QAM channel capacity without hardware 
changes. It remains fully SDV capable and also provides various stream 
management improvements. The new 3.X system releases are primarily intended 
for support of SDV applications. Other video deployments can continue to use 
2.02.X as the preferred release.  
Purpose 
The purpose of this document is to notify RF Gateway 1 users of the 
enhancements included in the current release, and inform users of any special 
upgrade procedures needed for using Release 3.01.06. 
Audience 
This document is intended for system engineers or managers responsible for 
operating and/or maintaining this product. 
Related Publications 
Refer to the following documents for additional information regarding hardware 
and software. 
 
Cisco RF Gateway 1 Configuration Guide, part number 4025112 
 
Cisco RF Gateway 1 System Guide, part number 4024958