Cisco Headend System Release 2.7 Guida All'Installazione
Appendix C
Direct ASI Installation and Configuration Procedures
122
4023737 Rev C
Check the Status of the ASI Card
After installing and configuring the ASI card and installing the ASI package, follow
these instructions to test the status of the card.
1 Type cd /opt/solHmux64 and then press Enter. The /opt/solHmux64 directory
these instructions to test the status of the card.
1 Type cd /opt/solHmux64 and then press Enter. The /opt/solHmux64 directory
becomes the working directory.
2 Type ./vpStatus -d /dev/Hmux0 -P 0 and then press Enter. The system displays
the status of the ASI card.
Example: Your results should look similar to, but not exactly like, the following
example.
Example: Your results should look similar to, but not exactly like, the following
example.
Note: An improperly installed ASI card will yield either no results or results that
clearly show an error.
clearly show an error.
3 Do the results from step 2 show the ASI card to be properly installed?
If yes, go to Restart System Components (on page 123).
If no, call Cisco Services for assistance.