Cisco Cisco D9824 Advanced Multi Decryption Receiver Guida All'Installazione
Setup Menu
78-4039426-01 Rev D
103
Parameter
Description
PMT
Regen
TSDT
Drop
NIT
Regen or Drop
NITO
Drop
SDT
Regen
SDTO
Drop
BAT
Drop
EIT
Drop
TDT
Pass
RST
Pass
TOT
Pass
DIT
Pass
SIT
Pass
ECM
Drop
EMM
Drop
DRT
Drop
CDT
Drop
10 Press MENU three times to exit the TS Out menu and save the data. If the
changes cannot be saved/made, a message will be displayed indicating "Bad
configuration data". The following options are available: Abandon, Exit or
Return. Select Return to re-enter the parameter.
Note: When remapping an input program channel to an output channel, ensure
that the PIDs are mapped to different PIDs to avoid PID collisions.
configuration data". The following options are available: Abandon, Exit or
Return. Select Return to re-enter the parameter.
Note: When remapping an input program channel to an output channel, ensure
that the PIDs are mapped to different PIDs to avoid PID collisions.
Synchronizing Output Services
To synchronize the output to the input Services Only:
This operation synchronizes the inputs to the outputs according to the service
assignments only. This is useful when you already have PID assignments set for the
services but want to ensure that the services are mapped correctly.
1 On the DPM menu, map the output services as desired.
2 Select PE Resync: Svcs. The receiver will synchronize the PE output according to
assignments only. This is useful when you already have PID assignments set for the
services but want to ensure that the services are mapped correctly.
1 On the DPM menu, map the output services as desired.
2 Select PE Resync: Svcs. The receiver will synchronize the PE output according to
the available input services only, and ignore the input to output service PID
mapping.
mapping.