Cisco Cisco Nexus 5010 Switch Guida All'Installazione

Cisco Nexus 5500 1RU Chassis (N5K-C5548P-FA)

Cisco Nexus 5500 Series 8x10GE 8xFC 8/4/2/1 (N55-M8P8FP)

Cisco Nexus 5500 Series 16-port 10GE (N55-M16FP)

Cisco Nexus 2148T Fabric Extender

Cisco Nexus 2248TP Fabric Extender

Cisco Nexus 2224TP Fabric Extender

Cisco Nexus 2232PP Fabric Extender

Cisco Nexus 2232TM Fabric Extender

Cisco Nexus 2232TT Fabric Extender

Cisco Nexus 2248T Fabric Extender

Cisco Nexus 2248TP-E Fabric Extender

When upgrading system software, follow these guidelines:

Configuration changes

You cannot enter configuration mode during an upgrade. You should save, commit, or discard any 
active configuration sessions before upgrading or downgrading the Cisco NX-OS software image. 
The active configuration session is deleted without a warning during a reload.

Use the show configuration session summary command to verify that there are no active 
configuration sessions.

switch# show configuration session summary

There are no active configuration sessions

For more information on configuration sessions, see the Cisco Nexus 5000 Series NX-OS System 
Management Configuration Guide.

CLI and SNMP configuration change requests are denied during a in-service software 
upgrade (ISSU). 

Topology—You should make topology changes such as Spanning Tree Protocol (STP) or Fiber 
Channel (FC) fabric changes, that affect zoning, Fabric Shortest Path First (FSPF), or FC domains 
before you perform an upgrade. You should perform module installations or removals only before 
or after an upgrade.

Scheduling—You should upgrade when your network is stable and steady. Ensure that everyone who 
has access to the switch or the network is not configuring the switch or the network during this time. 
You cannot configure a switch during an upgrade.