Cisco Cisco Web Security Appliance S660 Guida Utente
3-9
AsyncOS 8.1 for Cisco Web Security User Guide
Chapter 3 Connect the Appliance to a Cloud Web Security Tower
Configuring the Cloud Connector
Step 7. Configure Routes for Management and Data Traffic
Related topics
•
Step 8. Configure Transparent Connection Settings
By default, the Cloud Connector is deployed in transparent mode. which requires a connection to a
Layer-4 switch or a version 2 WCCP router.
Layer-4 switch or a version 2 WCCP router.
Related topics
•
Setting
Description
Default Gateway
The default gateway IPv4 address to use for the traffic through the Management
and/or Data interface.
and/or Data interface.
Name
A name used to identify the static route.
Internal Network
The IPv4 address for this route’s destination on the network.
Internal Gateway
The gateway IPv4 address for this route. A route gateway must reside on the same
subnet as the Management or Data interface on which it is configured.
subnet as the Management or Data interface on which it is configured.
Setting
Description
Layer-4 Switch
or
No Device
•
The Web Security appliance is connected to a layer 4 switch.
or
•
You will deploy the Cloud Connector in explicit forward mode.
WCCP v2 Router
The Web Security appliance is connected to a version 2 WCCP capable router.
Note: A password can contain up to seven characters and is optional.