Cisco Cisco MGX-FRSM-HS2 B Serial Frame Service Module
4
Cisco SM-X-1T3/E3 Enhanced Service Module Configuration Guide
OL-27148-02
Cisco SM-X-1T3/E3 Enhanced Service Module Configuration Guide
Configuring the SM-1T3/E3 Service Module
5.
exit
DETAILED STEPS
Configuring the SM-X-1T3/E3 on Cisco ISR G2 Routers
This section describes the tasks required to configure the SM-X-1T3/E3 on Cisco 2900 and 3900 Series
ISRs:
ISRs:
•
•
•
•
•
•
•
•
•
•
•
•
Command or Action
Purpose
Step 1
enable
Example:
Router> enable
Enables privileged EXEC mode.
•
Enter the password if prompted.
Step 2
configure
terminal
Example:
Router# configure terminal
Enters global configuration mode.
Step 3
ip dhcp use vrf connected
Example:
Router (config)# ip dhcp use vrf connected
Allocates IP from a DHCP pool specific to the interface.
Step 4
service dhcp
Example:
Router (config)# service dhcp
Enables DHCP.
Step 5
exit
Example:
Router (config-controller)# exit
Exits controller configuration mode and returns to
privileged EXEC mode.
privileged EXEC mode.