Cisco Cisco UCS B420 M4 Blade Server Scheda Tecnica
Cisco UCS B260 M4 Blade Server (with Intel® Xeon E7 v2 CPU)
CONFIGURING the SERVER
21
NOTE: For environments with 6100 Series Fabric Interconnects, you must configure
only the VIC 1240/1280 adapters (1200 Series) and not 1340/1380 (1300 Series).
From an I/O connectivity standpoint, configure only the VIC 1200 Series with the
6100 Series Fabric Interconnects.
only the VIC 1240/1280 adapters (1200 Series) and not 1340/1380 (1300 Series).
From an I/O connectivity standpoint, configure only the VIC 1200 Series with the
6100 Series Fabric Interconnects.
NOTE: There are three slots on the server. One is a dedicated slot for the VIC
1340/1240 adapter only and the other two accommodate Cisco or Cisco Storage
Accelerator adapters as well as other options.
1340/1240 adapter only and the other two accommodate Cisco or Cisco Storage
Accelerator adapters as well as other options.
shows which adapters plug
into each of the three slots. Only the VIC 1340 or 1240 adapter plugs into the VIC
1340/1240 adapter slot. All other adapters plug into the other two mezzanine
adapter slots.
1340/1240 adapter slot. All other adapters plug into the other two mezzanine
adapter slots.
NOTE: You must have a B260 M4 configured with 2 CPUs to support cards that plug
into either of the two mezzanine connectors. The VIC 1340 and 1240 adapters are
supported on both 1- and 2-CPU configured systems.
into either of the two mezzanine connectors. The VIC 1340 and 1240 adapters are
supported on both 1- and 2-CPU configured systems.