Cisco Cisco UCS C240 M4 Rack Server Scheda Tecnica

■

CPU1 and CPU2 must be installed to support PCIe slots 1 through 5.

■

CPU3 and CPU4 must be installed to support PCIe slots 6 through 10.

■

Legacy I/O devices such as video cards are only supported on slots 1, 2, 4, 5, 6, 7, 8, 9, and 
10.

■

The Cisco Card NIC mode is currently supported only with a Cisco VIC card that is installed in 
PCIe slot 4, 5, 9, or 10.

■

The C460 M4 server accommodates the Cisco Virtual Interface card, which is supported 
primarily in slot 4.

— Only one Cisco 1225 VIC can be used for both UCSM management and data traffic in 

the C460 M4 server

— The Cisco 1225 VIC in slot 4 handles management and data traffic.

— If a second Cisco 1225 VIC is installed in slot 5, 9, or 10 it will be used for data 

traffic only.

— Only two VICs total are supported in UCSM mode

■

All PCIe slots are standard-height and require a standard-height mounting bracket on the 
PCIe card.

■

The UCSC-PCIE-ITG and UCSC-PCIE-CSC-02 cannot be installed in the same system.

■

You cannot have a GPU installed in slot 7 and at the same time have a QLE2562 HBA 
(N2XX-AQPCI05) installed in slot 9.

■

Additional considerations for the Cisco 1225 VIC card:

— Supports 10G SFP+ optical and copper twinax connections

— To use the Cisco Card NIC mode, this card must be installed in PCIe slot 4, 5, 9, or 

10. Slot 4, 5, 9, or 10 can operate while the server is in standby power mode. 

— Requires that the server has CIMC firmware version 1.4(6) or later installed. There is 

a heartbeat LED on the top of the card that indicates when firmware is active.

— To use this card for UCS integration (Cisco UCS Manager mode) with Cisco UCS 

Manager 2.1(0) or later, the minimum card-firmware and uboot image level is 
2.1(0.306).

■

To help ensure that your operating system is compatible with the cards you have selected, 
please check the Hardware Compatibility List at this URL: