Cisco Cisco Virtualization Experience Client 2111 Guida Dell'Amministratore
3-18
Cisco Virtualization Experience Client 2112/2212 ICA Administration Guide for WTOS 7.0_214
OL-215152-01
Chapter 3 Configuring Connectivity Options
Advanced Details on Configuring ICA and RDP Connections
–
1360 x 768
–
1368 x 768
–
1440 x 900
–
1600 x 900
–
1600 x 1200
–
1680 x 1050
–
1920 x 1080
–
1920 x 1200
•
Colors—Select the color depth of the RDP session. If High Colors (16 bits) or True Colors (32 bits)
is selected and the RDP server does not support this color depth, the zero client renegotiates the
color depth to the lower value, for example, 256 Colors (8 bits). The highest is 32 bits, if hardware
supports it.
is selected and the RDP server does not support this color depth, the zero client renegotiates the
color depth to the lower value, for example, 256 Colors (8 bits). The highest is 32 bits, if hardware
supports it.
Tip
For some zero clients versions, only the 256 Colors (8 bits) selection is available for RDP
connections. Also, for older versions of the server software (for example, RDP 4.0) the server
supports only 8 bit color. This is not detectable in advance but results in use of 8-bit color when
the connection is established.
connections. Also, for older versions of the server software (for example, RDP 4.0) the server
supports only 8 bit color. This is not detectable in advance but results in use of 8-bit color when
the connection is established.
•
Window mode and Full screen mode—Select the initial view of the application in a windowed
screen or full screen. You can toggle between viewing modes by using Ctrl-Alt-Up Arrow.
screen or full screen. You can toggle between viewing modes by using Ctrl-Alt-Up Arrow.
•
Auto-connect on start-up—When selected, automatically connects the session on start-up.
•
Re-connect after disconnect—When selected, causes the zero client to automatically reconnect to a
session after a non-operator-initiated disconnect. If selected, the wait interval is that set in the Delay
before re-connecting box (enter the number of seconds 1 to 3600) or the user profile for yes (20
seconds) or seconds. The default is 20 seconds if there is no INI file description of this connection,
or is a Standalone user, or is simply omitted.
session after a non-operator-initiated disconnect. If selected, the wait interval is that set in the Delay
before re-connecting box (enter the number of seconds 1 to 3600) or the user profile for yes (20
seconds) or seconds. The default is 20 seconds if there is no INI file description of this connection,
or is a Standalone user, or is simply omitted.
Tip
You can reset the options on the Connection tab of the Connection Settings (RDP) dialog box.
To do so, click the Reset VM command button. This command button is located in the
upper-right of the dialog box. It appears only with a VDM broker connection.
To do so, click the Reset VM command button. This command button is located in the
upper-right of the dialog box. It appears only with a VDM broker connection.