Cisco Cisco Gigabit Ethernet Switch Module (CGESM) for HP Riferimenti tecnici
B-28
Cisco Gigabit Ethernet Switch Module for the HP p-Class BladeSystem Command Reference Guide
380265-002
Appendix B CGESM Switch Debug Commands
debug platform cpu-queues
debug platform cpu-queues
Use the debug platform cpu-queues privileged EXEC command to enable debugging of platform
central processing unit (CPU) receive queues. Use the no form of this command to disable debugging.
central processing unit (CPU) receive queues. Use the no form of this command to disable debugging.
debug platform cpu-queues {broadcast-q | cbt-to-spt-q | cpuhub-q | host-q | icmp-q |
igmp-snooping-q | layer2-protocol-q | logging-q | remote-console-q | software-fwd-q |
stp-q}
stp-q}
no debug platform cpu-queues {broadcast-q | cbt-to-spt-q | cpuhub-q | host-q | icmp-q |
igmp-snooping-q | layer2-protocol-q | logging-q | remote-console-q | software-fwd-q |
stp-q}
stp-q}
Syntax Description
Note
Though visible in the command-line help strings, the routing-protocol-Q and rpffail-q keywords are
not supported.
not supported.
Defaults
Debugging is disabled.
Command Modes
Privileged EXEC
Command History
broadcast-q
Display debug messages about packets received by the broadcast queue.
cbt-to-spt-q
Display debug messages about packets received by the core-based tree to
shortest-path tree (cbt-to-spt) queue.
shortest-path tree (cbt-to-spt) queue.
cpuhub-q
Display debug messages about packets received by the CPU heartbeat queue.
host-q
Display debug messages about packets received by the host queue.
icmp-q
Display debug messages about packets received by the Internet Control Message
Protocol (ICMP) queue.
Protocol (ICMP) queue.
igmp-snooping-q
Display debug messages about packets received by the Internet Group
Management Protocol (IGMP)-snooping queue.
Management Protocol (IGMP)-snooping queue.
layer2-protocol-q
Display debug messages about packets received by the Layer 2 protocol queue.
logging-q
Display debug messages about packets received by the logging queue.
remote-console-q
Display debug messages about packets received by the remote console queue.
software-fwd-q
Debug packets received by the software forwarding queue.
stp-q
Debug packets received by the Spanning Tree Protocol (STP) queue.
Release
Modification
12.2(25)SE1
This command was introduced.