Cisco Cisco TelePresence MX700 Riferimenti tecnici
D15335.03
Cisco TelePresence MX700 and MX800 API Reference Guide CE8.1, APRIL 2016.
Copyright © 2016 Cisco Systems, Inc. All rights reserved.
128
Cisco TelePresence MX700 and MX800
API Reference Guide
Standby commands
xCommand Standby Activate
Set the system in standby mode, which turns off the video outputs and put the camera into
sleep mode.
Requires user role: ADMIN, USER
USAGE:
xCommand Standby Activate
xCommand Standby Deactivate
Bring the system out of standby mode.
Requires user role: ADMIN, USER
USAGE:
xCommand Standby Deactivate
xCommand Standby ResetTimer
Set a temporary standby delay. If the system is in standby mode when the reset timer is set,
the system is brought out of standby mode. When left idle for the given delay the system goes
into standby mode. Setting the reset timer does not affect the Standby Delay in the Advanced
configuration menu (or by xConfiguration Standby Delay). Next time this delay is the valid
standby delay.
Requires user role: ADMIN, USER
USAGE:
xCommand Standby ResetTimer Delay:
Delay
where
Delay: Integer (1..480)
Set the delay in minutes.
SystemUnit commands
xCommand SystemUnit Boot
Reboot the system.
Requires user role: ADMIN, USER
USAGE:
xCommand SystemUnit Boot [Action:
Action
]
where
Action: Restart/Shutdown
As a default the system restarts after a reboot. By selecting Shutdown, the system will
not restart.
xCommand SystemUnit FactoryReset
Reset the codec to factory default settings. The call logs are deleted and all system parameters
are reset to default values. All files that have been uploaded to the codec are deleted. Option
key(s) are not affected.
As a default the system restarts after the factory reset, but other behaviour can be forced by
As a default the system restarts after the factory reset, but other behaviour can be forced by
selecting a different TrailingAction.
Requires user role: ADMIN
USAGE:
xCommand SystemUnit FactoryReset Confirm:
Confirm
[TrailingAction:
TrailingAction
]
where
Confirm: Yes
TrailingAction: NoAction/Restart/Shutdown
Select Shutdown or NoAction to override the default behaviour (Restart).
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus
xCommand