Cisco Cisco TelePresence MX700 Riferimenti tecnici
D15335.03
Cisco TelePresence MX700 and MX800 API Reference Guide CE8.1, APRIL 2016.
Copyright © 2016 Cisco Systems, Inc. All rights reserved.
46
Cisco TelePresence MX700 and MX800
API Reference Guide
xConfiguration Audio Output HDMI [2] Level
This setting is only available for MX800 Single. It is not applicable in this version.
USAGE:
xConfiguration Audio Output HDMI
n
Level:
Level
where
n
: Unique ID that identifies the HDMI output. Range: 2..2
xConfiguration Audio Output HDMI [2] Mode
This setting is only available for MX800 Single. It is not applicable in this version.
USAGE:
xConfiguration Audio Output HDMI
n
Mode:
Mode
where
n
: Unique ID that identifies the HDMI output. Range: 2..2
xConfiguration Audio Output Line [1..6] Channel
Define whether the Audio Line output is a mono signal or part of a multichannel signal.
Requires user role: ADMIN
Default value: Left
Default value: Left
USAGE:
xConfiguration Audio Output Line
n
Channel:
Channel
where
n
: Unique ID that identifies the audio line output. Range: 1..6
Channel
: Left/Mono/Right
Left: The Audio Line output signal is the left channel of a stereo signal.
Mono: The Audio Line output signal is a mono signal.
Right: The Audio Line output signal is the right channel of a stereo signal.
xConfiguration Audio Output Line [1..6] Delay DelayMs
To obtain lip-synchronization, you can configure each audio line output with an extra delay that
compensates for delay in other connected devices, for example TVs. The delay that you set
here is either fixed or relative to the delay on the HDMI output, as defined in the Audio Output
Line [n] Delay Mode setting.
Requires user role: ADMIN
Default value: 0
Default value: 0
USAGE:
xConfiguration Audio Output Line
n
Delay DelayMs:
DelayMs
where
n
: Unique ID that identifies the audio line output. Range: 1..6
DelayMs
: Integer (0..290)
The delay in milliseconds.
xConfiguration Audio Output Line [1..6] Delay Mode
You may add extra delay to an audio line output with the Audio Output Line [n] Delay DelayMs
setting. The extra delay added is either a fixed number of milliseconds, or a number of millisec-
onds relative to the detected delay on the HDMI output (typically introduced by the connected
TV).
Requires user role: ADMIN
Default value: Fixed
Default value: Fixed
USAGE:
xConfiguration Audio Output Line
n
Delay Mode:
Mode
where
n
: Unique ID that identifies the audio line output. Range: 1..6
Mode
: Fixed/RelativeToHDMI
Fixed: Any extra delay (DelayMs) added to the output, will be a fixed number of
Fixed: Any extra delay (DelayMs) added to the output, will be a fixed number of
millisecond.
RelativeToHDMI: Any extra delay (DelayMs) added to the output, will be relative to the
detected delay on the HDMI output. The actual delay is HDMI-delay + DelayMs. The
Audio Output Connectors Line [n] DelayMs status reports the actual delay.
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus
xConfiguration