Cisco Cisco TelePresence MX700 Riferimenti tecnici
D15335.03
Cisco TelePresence MX700 and MX800 API Reference Guide CE8.1, APRIL 2016.
Copyright © 2016 Cisco Systems, Inc. All rights reserved.
59
Cisco TelePresence MX700 and MX800
API Reference Guide
xConfiguration H323 NAT Address
Define the external/global IP address to the router with NAT support. Packets sent to the
router will then be routed to the system. Note that NAT cannot be used when registered to a
gatekeeper.
In the router, the following ports must be routed to the system's IP address:
* Port 1720
* Port 5555-6555
* Port 2326-2487
* Port 5555-6555
* Port 2326-2487
Requires user role: ADMIN
Default value: ""
Default value: ""
USAGE:
xConfiguration H323 NAT Address: "
Address
"
where
Address
: String (0, 64)
A valid IPv4 address or IPv6 address.
Network configuration
xConfiguration Network [1] DNS Domain Name
The DNS Domain Name is the default domain name suffix which is added to unqualified names.
Example: If the DNS Domain Name is "company.com" and the name to lookup is
"MyVideoSystem", this will result in the DNS lookup "MyVideoSystem.company.com".
Requires user role: ADMIN
Default value: ""
Default value: ""
USAGE:
xConfiguration Network
n
DNS Domain Name: "
Name
"
where
n
: Index that identifies the network. Range: 1..1
Name
: String (0, 64)
The DNS domain name.
xConfiguration Network [1] DNS Server [1..3] Address
Define the network addresses for DNS servers. Up to three addresses may be specified. If the
network addresses are unknown, contact your administrator or Internet Service Provider.
Requires user role: ADMIN
Default value: ""
Default value: ""
USAGE:
xConfiguration Network
n
DNS Server
m
Address: "
Address
"
where
n
: Index that identifies the network. Range: 1..1
m
: Index that identifies the DNS server. Maximum three DNS servers are allowed. Range: 1..3
Address
: String (0, 64)
A valid IPv4 address or IPv6 address.
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus
xConfiguration