Cisco Cisco TelePresence MX700 Riferimenti tecnici

D15335.03

 Cisco TelePresence MX700 and MX800 API Reference Guide CE8.1, APRIL 2016. 

Copyright © 2016 Cisco Systems, Inc. All rights reserved. 

83

Cisco TelePresence MX700 and MX800

API Reference Guide

Standby configuration

xConfiguration Standby Control

Define whether the system should go into standby mode or not.

Requires user role: ADMIN
Default value: On

USAGE:

xConfiguration Standby Control: 

where

: Off/On

Off: The system will not enter standby mode.

On: The system will enter standby mode when the Standby Delay has timed out. 

Requires the Standby Delay to be set to an appropriate value.

xConfiguration Standby Delay

Define how long (in minutes) the system shall be in idle mode before it goes into standby mode. 

Requires the Standby Control to be enabled.

Requires user role: ADMIN
Default value: 10

USAGE:

xConfiguration Standby Delay: 

where

: Integer (1..480)

Set the standby delay (minutes).

xConfiguration Standby BootAction

Define the camera position after a restart of the codec.

Requires user role: ADMIN
Default value: DefaultCameraPosition

USAGE:

xConfiguration Standby BootAction: 

where

: None/DefaultCameraPosition/RestoreCameraPosition

None: No action.

RestoreCameraPosition: When the video system restarts, the camera returns to the 

position that it had before the restart.

DefaultCameraPosition: When the video system restarts, the camera moves to the 

factory default position.

xConfiguration Standby StandbyAction

Define the camera position when going into standby mode.

Requires user role: ADMIN
Default value: PrivacyPosition

USAGE:

xConfiguration Standby StandbyAction: 

where

: None/PrivacyPosition

None: No action.

PrivacyPosition: When the video system enters standby, the camera turns to a sideways 

position for privacy.

Introduction

About the API

xConfiguration

Appendices

xCommand

xStatus



xConfiguration