Cisco Cisco TelePresence MX700 Guida All'Installazione

Pagina di 46
The System configuration menu
The settings are arranged with the following top level categories:
• 
Audio: 
Settings for microphones, audio outputs, echo control, volume, 
sounds, alerts, and more.
• 
Cameras:
 Settings for focus mode, brightness, whitebalance, 
backlight compensation, options like flip and mirror, and more.
• 
Conference:
 Conference settings like transmit and receive bit rates, 
bandwidth allocation, incoming call handling, encryption, packet loss 
resilience and far end control.
• 
FacilityService:
 Setting up speed dial buttons for facility services, 
e.g. Helpdesk.
• 
GPIO: 
Definition of the GPIO pins.
• 
H323:
 All H.323 protocol settings.
• 
Logging:
 Set logging mode (not applicable in this software version).
• 
Network:
 IP, VLAN and QoS settings.
• 
NetworkPort:
 Enable/disable the codec's second Ethernet port.
• 
NetworkServices:
 Enable/disable the network services: Multiway, 
Telnet, SSH, HTTP, HTTPS, SNMP, H323, SIP and NTP.
• 
Phonebook Server: 
Phonebook type and location. 
• 
Provisioning:
 Settings for provisioning mode, manager address and 
protocols and methods.
• 
RTP Port Range: 
RTP port numbers.
• 
Security:
 Settings for an audit server and error logging.
• 
SerialPort:
 Enable or disable the serial port, and set its baud rate. 
• 
SIP:
 All settings for the SIP protocol.
• 
Standby: 
Configure when the system should enter standby and how 
it should behave when entering/leaving standby mode.
• 
SystemUnit:
 Settings like system name and type, and menu language 
selection.
• 
Time:
 Date and time settings.
• 
User Interface:
 Touch controller settings. 
• 
Video: 
Settings for video sources and monitors, and video display 
set-up and layout.
The System Configuration page on 
the web interface
You open the web interface by entering your video conference 
system's IP address in the address bar of a web browser; then 
you sign in.
When signed in, you can open the System Configuration page 
from the Configuration menu. 
You can access all configuration settings from this page. 
All settings are not available on all products; therefore the folders 
shown to the right may or may not be present on your system.
You can find a complete description of the web interface and 
the settings in the administrator guide for your system.
Cisco TelePresence Video Systems
D14639.15 Video Systems Getting Started Guide TC7.2, OCTOBER 2014. 
Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved. 
41
Getting Started Guide
Contents
Introduction
User interfaces
Configuration
Appendices
Contacts
Appendices