Cisco Cisco TelePresence MX700 Guida All'Installazione
Configuration tasks
The initial configuration tasks are described on the following
pages. Click the
Read more...
hyperlink for the method you
want to use to find the task description.
Click the
Back...
button in the task description to go back
to this task overview.
Getting started
Here you can see how to wake up the system and start using
one of the user interfaces:
Touch controller
Web interface
Remote control
and on screen menu
Provisioning set-up
(when using a provisioning system)
Your system may be configured by an external provisioning
system. This way a number of settings are provisioned automati-
cally, and you most likely do not have to set the IP, H.323, SIP
and Time and Date settings.
Choose one of the following methods to set-up the provision-
ing parameters:
Remote control
and on screen menu
Web interface
Touch controller
Setting the IP parameters
(when not set by a provisioning system)
Your video conference system must be connected to an IP
network. Both IP version 4 (IPv4) and IP version 6 (IPv6) are
supported. In both cases, the IP parameters can be assigned
automatically by the network, or you can set everything manually.
Choose one of the following methods to set the IP parameters:
Web interface
Touch controller
Remote control
and on screen menu
Set up assistant
(SX10)
Set up assistant
(SX10)
Set up assistant
(SX10)
Cisco TelePresence Video Systems
D14639.15 Video Systems Getting Started Guide TC7.2, OCTOBER 2014.
Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.
9
Getting Started Guide
Contents
Introduction
User interfaces
Configuration
Appendices
Contacts
Configuration