Sony SSCE473 Manuale Utente
Turbo AGC
The SSC-E470 series cameras are equipped with an advanced
Turbo AGC function. This allows the user to boost camera gain
to 24 dB, enabling viewers of the image to distinguish the
subject more easily - even if it is shot in low light. The AGC
mode is switchable between OFF and TURBO.
Turbo AGC function. This allows the user to boost camera gain
to 24 dB, enabling viewers of the image to distinguish the
subject more easily - even if it is shot in low light. The AGC
mode is switchable between OFF and TURBO.
Back-Light Compensation (BLC)
Unwanted backlighting can often cause the subject matter of an
image to be cast into shadow. The BLC function incorporated in
these cameras automatically compensates for such conditions
and allows the subject to be more visible.
image to be cast into shadow. The BLC function incorporated in
these cameras automatically compensates for such conditions
and allows the subject to be more visible.
CCD IRIS
The CCD IRIS function allows the use of a manual iris lens
instead of a more costly automatic iris lens. As the image
brightness increases, the camera adjusts the exposure by
automatically reducing the CCD photo sensor's exposure time
(charge accumulation time). This is achieved by using the CCD
electronics shutter, which has a range of 1/60 (NTSC) / 1/50 (PAL)
to 1/100,000 second.
instead of a more costly automatic iris lens. As the image
brightness increases, the camera adjusts the exposure by
automatically reducing the CCD photo sensor's exposure time
(charge accumulation time). This is achieved by using the CCD
electronics shutter, which has a range of 1/60 (NTSC) / 1/50 (PAL)
to 1/100,000 second.
Other Convenient Features
DC-Servo Lens Connection Capability
The SSC-E470 series cameras supports the widely available DC-
servo lenses.
servo lenses.
CS-Mount
These cameras are equipped with a CS-mount, which provides
compatibility with industry-standard CS-mount lenses.
compatibility with industry-standard CS-mount lenses.
AC 24 V/DC 12 V Operation
The SSC-E473 and SSC-E473P accept both AC 24 V and DC 12 V
power sources, and will automatically switch to the appropriate
mode upon receiving power.
power sources, and will automatically switch to the appropriate
mode upon receiving power.
Sync System
The sync system of these cameras can be switched between internal
lock and AC line lock. When AC line lock is selected, the V-phase
can be adjusted by ± 90°C.
lock and AC line lock. When AC line lock is selected, the V-phase
can be adjusted by ± 90°C.
VIDEO OUT (Coaxial cable)
VIDEO OUT (Coaxial cable)
VIDEO OUT (Coaxial cable)
VIDEO OUT (Coaxial cable)
VIDEO OUT
(Coaxial cable)
Video Monitor
PC
Multiple Camera Operation over LAN
Ethernet
Ethernet
SNT-V501/SNT-V504
SONY Video Network Station
LAN
SSC-E478P
SSC-E473/E473P/E478P
VIDEO OUT (Coaxial cable)
VIDEO OUT (Coaxial cable)
VIDEO OUT (Coaxial cable)
VIDEO OUT (Coaxial cable)
Video Monitor
AC outlet
AC 24 V or DC 12 V
power supply
AC 24 V or DC 12 V
power supply
Multiple Camera Operation (In case of Line Lock)
Single Camera Operation
Sony Time Lapse VCR
or
Hard Disk Recorder
(HSR-X200/X200P)
AC outlet
Video Monitor
Multiplexer
(ex. YS-DX504/DX504P)
Monitor 1
Monitor 2
VIDEO OUT (Coaxial cable)
VIDEO OUT (Coaxial cable)
VIDEO OUT (Coaxial cable)
VIDEO OUT (Coaxial cable)
Video Monitor
AC outlet
Multiple Camera Operation (In case of Line Lock)
Single Camera Operation
Sony Time Lapse VCR
or
Hard Disk Recorder
(HSR-X200P)
AC outlet
Video Monitor
Multiplexer
(ex. YS-DX504P)
Monitor 1
Monitor 2
SSC-E473/E473P
SYSTEM CONFIGURATIONS
MK10155V1.qxd 04.9.6 4:06 PM Page 3