Cisco Cisco TelePresence MX700 Manuale Di Manutenzione
D15331.04 MX700 and MX800 Administrator Guide CE8.2, OCTOBER 2016.
www.cisco.com — Copyright © 2016 Cisco Systems, Inc. All rights reserved.
24
Cisco TelePresence MX700 and MX800
Administrator Guide
Power On and Off
Power On/Off with the Power switch
The power switch is behind the left side cover.
It is located in the same place for both MX700,
MX800 Single and MX800 Dual, all mounting options.
1. Remove the left side cover. It snaps to magnets.
2. The power switch is next to the power connector
below the codec.
Power switch
Power Off or restart the system remotely
Sign in to the web interface and navigate to
Maintenance >
Restart
.
Restart the system
Click
Restart device...
and confirm your choice.
It takes a few minutes before the system is ready for use.
Power Off the system
Click
Shutdown device...
and confirm your choice.
You cannot power On the system remotely.
Restart and standby using the Touch
controller
Restart the system
1. Select the settings icon (cogwheel) in the status bar of
the Touch controller.
2. Select
Settings > Restart
.
3. Select
Restart
again to confirm your choice.
Enter/exit standby mode
1. Select the settings icon (cogwheel) in the status bar of
the Touch controller.
2. Select
Standby
.
Introduction
Configuration
Peripherals
Maintenance
System settings
Appendices
Introduction