Cisco Cisco TelePresence MX700 Manuale Di Manutenzione
D15331.04 MX700 and MX800 Administrator Guide CE8.2, OCTOBER 2016.
www.cisco.com — Copyright © 2016 Cisco Systems, Inc. All rights reserved.
60
Cisco TelePresence MX700 and MX800
Administrator Guide
Preparations
Whiteboard position
Speaker track camera
Whiteboard
Accurate distance (d)
between camera
and whiteboard
d
The whiteboard must be placed across the room from
the camera, as shown in the illustration.
When configuring the feature, you need to know
the accurate distance between the camera and the
whiteboard.
Speaker position
Sound
tracking
area
The Sound tracking area is from half the whiteboard
and up.
Thus, the person presenting on the whiteboard must
stand upright next to the whiteboard. He or she
cannot move about in the room.
Set up the Snap to Whiteboard feature
(page 1 of 3)
The Snap to Whiteboard feature extends the speaker
tracking functionality, thus you need a camera that
supports SpeakerTrack:
• MX700 and MX800 with dual camera, or
• SX80 with SpeakerTrack 60 camera
• SX80 with SpeakerTrack 60 camera
Cameras > SpeakerTrack > Mode
must be set to
Auto,
and speaker tracking must be switched on with the Touch
controller.
With the Snap to Whiteboard extension, the camera
captures both the person and the whiteboard when a
person next to the whiteboard talks.
Without the Snap to Whiteboard extension, the camera
captures only the person.
Introduction
Configuration
Peripherals
Maintenance
System settings
Appendices
Peripherals