Cisco Cisco TelePresence MX700 Manuale Di Manutenzione
D15331.04 MX700 and MX800 Administrator Guide CE8.2, OCTOBER 2016.
www.cisco.com — Copyright © 2016 Cisco Systems, Inc. All rights reserved.
99
Cisco TelePresence MX700 and MX800
Administrator Guide
Audio Input Microphone [1..8] VideoAssociation
MuteOnInactiveVideo
The microphone can be associated with a video source on the video input connector, and
you can determine whether to play or mute audio depending on whether the video source is
presented or not. By default, audio is not muted.
Requires user role: ADMIN
Default value: On
Default value: On
Value space: Off/On
Off: No video source is associated.
On: A video source is associated, and the audio will be muted if the associated video
On: A video source is associated, and the audio will be muted if the associated video
source is not displayed.
Audio Input Microphone [1..8] VideoAssociation
VideoInputSource
Select the video input connector to associate the audio source with.
Requires user role: ADMIN
Default value: 1
Default value: 1
Value space: 1/2/3/4/5
Select the video input connector to associate the audio source with.
Audio Input Microphone [1..8] Level
Define the level of the Microphone input connector.
See the Audio Level table in the Physical Interface Guide for Cisco TelePresence SX80 for a
See the Audio Level table in the Physical Interface Guide for Cisco TelePresence SX80 for a
complete overview of the values represented in dB.
Requires user role: ADMIN
Default value: 58
Default value: 58
Value space: Integer (0..70)
Select a value between 0 and 70, in steps of 1 dB.
Audio Input Microphone [1..8] Mode
Disable or enable audio on the microphone connector.
Requires user role: ADMIN
Default value: On
Default value: On
Value space: Off/On
Off: Disable the audio input microphone connector.
On: Enable the audio input microphone connector.
On: Enable the audio input microphone connector.
Audio Input Microphone [1..8] Type
The microphone connectors are intended for electret type microphones. The microphone
connector can be set to line or microphone mode.
Requires user role: ADMIN
Default value: Line
Default value: Line
Value space: Line/Microphone
Microphone: Select Microphone when you have 48 V Phantom voltage and the pre-
amplification is On.
Line: Select Line when you have a standard balanced line input. The phantom voltage
Line: Select Line when you have a standard balanced line input. The phantom voltage
and pre-amplification is Off.
Audio Output HDMI [2] Level
This setting is only available for MX800 Single. It is not applicable in this version.
Audio Output HDMI [2] Mode
This setting is only available for MX800 Single. It is not applicable in this version.
Introduction
Configuration
Peripherals
Maintenance
System settings
Appendices
System settings