Manualsbrain.com
  1. Manuali
  2. Marche
  3. Cisco
  4. Cisco TelePresence MX700
  5. Manuale Di Manutenzione

Cisco Cisco TelePresence MX700 Manuale Di Manutenzione

Scarica
Pagina di 170
D15331.01 MX700 and MX800 Administrator Guide CE8.0, NOVEMBER 2015.  
www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved. 
114
Cisco TelePresence MX700 and MX800
Administrator Guide
NetworkServices SNMP Mode
SNMP (Simple Network Management Protocol) is used in network management systems 
to monitor network-attached devices (routers, servers, switches, projectors, etc) for 
conditions that warrant administrative attention. SNMP exposes management data in the 
form of variables on the managed systems, which describe the system configuration. These 
variables can then be queried (set to ReadOnly) and sometimes set (set to ReadWrite) by 
managing applications.
Requires user role: ADMIN
Default value: ReadOnly
Value space: Off/ReadOnly/ReadWrite
Off: Disable the SNMP network service.
ReadOnly: Enable the SNMP network service for queries only.
ReadWrite: Enable the SNMP network service for both queries and commands.
NetworkServices SNMP Host [1..3] Address
Define the address of up to three SNMP Managers.
The system's SNMP Agent (in the codec) responds to requests from SNMP Managers (a PC 
program etc.), for example about system location and system contact. SNMP traps are not 
supported.
Requires user role: ADMIN
Default value: ""
Value space: String (0, 64)
A valid IPv4 address, IPv6 address or DNS name.
NetworkServices SNMP CommunityName
Define the name of the Network Services SNMP Community. SNMP Community names 
are used to authenticate SNMP requests. SNMP requests must have a password (case 
sensitive) in order to receive a response from the SNMP Agent in the codec. The default 
password is "public". If you have the Cisco TelePresence Management Suite (TMS) you 
must make sure the same SNMP Community is configured there too. NOTE: The SNMP 
Community password is case sensitive.
Requires user role: ADMIN
Default value: ""
Value space: String (0, 50)
The SNMP community name.
NetworkServices SNMP SystemContact
Define the name of the Network Services SNMP System Contact.
Requires user role: ADMIN
Default value: ""
Value space: String (0, 50)
The name of the SNMP system contact.
NetworkServices SNMP SystemLocation
Define the name of the Network Services SNMP System Location.
Requires user role: ADMIN
Default value: ""
Value space: String (0, 50)
The name of the SNMP system location.
Introduction
Configuration
Peripherals
Maintenance
System settings
Appendices
System settings