Cisco Cisco TelePresence MX700 Manuale Di Manutenzione
D15331.01 MX700 and MX800 Administrator Guide CE8.0, NOVEMBER 2015.
www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.
125
Cisco TelePresence MX700 and MX800
Administrator Guide
SerialPort settings
SerialPort Mode
Enable/disable the serial port (COM port).
Requires user role: ADMIN
Default value: On
Default value: On
Value space: Off/On
Off: Disable the serial port.
On: Enable the serial port.
On: Enable the serial port.
SerialPort BaudRate
Define the baud rate (data transmission rate, bits per second) for the serial port. The default
value is 115200.
Other connection parameters for the serial port are: Data bits: 8; Parity: None; Stop bits: 1;
Other connection parameters for the serial port are: Data bits: 8; Parity: None; Stop bits: 1;
Flow control: None.
Requires user role: ADMIN
Default value: 115200
Default value: 115200
Value space: 9600/19200/38400/57600/115200
Set a baud rate from the baud rates listed (bps).
SerialPort LoginRequired
Define if login shall be required when connecting to the serial port.
Requires user role: ADMIN
Default value: On
Default value: On
Value space: Off/On
Off: The user can access the codec via the serial port without any login.
On: Login is required when connecting to the codec via the serial port.
On: Login is required when connecting to the codec via the serial port.
Introduction
Configuration
Peripherals
Maintenance
System settings
Appendices
System settings