Cisco Cisco TelePresence MX700 Manuale Di Manutenzione

D15331.01 MX700 and MX800 Administrator Guide CE8.0, NOVEMBER 2015.  

www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved. 

157

Cisco TelePresence MX700 and MX800

Administrator Guide

Control the local camera(s)

Sign in to the web interface and navigate to 

.

Prerequisites

•  The 

 setting is switched 

On .

•  The camera has pan, tilt or zoom functionality.

Move the camera using the pan/tilt/zoom controls

1.  Choose which camera to control in the Main Source drop 

down list.

2.  Click the camera icon to open the camera control 

window.
Video snapshots from the room are only displayed for 

video systems that have the Remote Monitoring option.

3.  Use the left and right arrows to pan the camera; the up 

and down arrows to tilt it; and 

+

 and 

-

 to zoom in and out.

Only relevant controls appear in the window.

Move the camera to a preset position

1.  Choose which camera to control in the Main Source 

drop down list.

2.  Click 

 to open a list of available presets.

If no presets are defined, the button is disabled and 

named No presets.

3.  Click a preset’s name to move the camera to the preset 

position.

4.  Click 

 to close the window.

You cannot use the web interface to define a preset; 

you should use the Touch controller. 

Main Source drop down list

Choose which camera to control from 

the drop down list.

Automatically refresh snapshots

Snapshot area

Shows snapshots of the selected main input source.

Only available on video systems that have the 

Remote Monitoring option.

Introduction

Configuration

Peripherals

Maintenance

System settings

Appendices



Appendices