Cisco Cisco TelePresence MX700 Manuale Di Manutenzione

D15331.01 MX700 and MX800 Administrator Guide CE8.0, NOVEMBER 2015.

Cisco TelePresence MX700 and MX800

Administrator Guide

Upgrade the system software

(page 1 of 2)

About upgrading from TC to CE software

CE8.0 is the evolution of TC7.x software. CE8.0 inherits

years of development in the TC software while being more

streamlined, providing higher quality and higher feature

velocity.

It is important to carefully consider the upgrade requirements

of CE8.0 and the functionality changes compared to TC7.x

software before upgrading.

We highly recommend upgrading endpoints to TC7.3.3 or

later before proceeding with the upgrade to CE8.0. Upgrading

to CE software from TC7.3.0 and TC7.3.1 is not supported via

the web interface.

If you do not take into account these considerations,

upgrading to CE8.0 can leave you with a non-functioning

deployment that requires you to downgrade.

Do you require

features that are

no longer

supported?

Are you currently

using the API (for

example Crestron or

AMX)?

Are your endpoints

running TC7.3.1 or

earlier?

Install CE8.0?

Install CE8.0

Yes

Update your application to

the new API commands

before installing CE8.0

Yes

Use TC7.x software

Yes

Upgrade via Cisco TMS or

CUCM. Alternatively upgrade

to TC7.3.3 or later before

attempting to upgrade via the

web interface

Do you use TMS, and

have an older version

than TMS 15.0?

Yes

Upgrade to TMS 15.0 or later

CE software does not support the following features and products:

- MultiWay conferencing

- CTMS conferencing

- MediaNet

- Displays that do not support 16:9 or 16:10 resolution

- Custom video layouts, video composition using TC Console

(temporarily removed). CE Console is for audio and GPIO only

Also note that CE software does not support the EX Series, C Series,

Profile Series, and first-generation MX200 and MX300

Introduction

Configuration

Peripherals

Maintenance

System settings

Appendices



Maintenance