Cisco Cisco TelePresence MX700 Manuale Di Manutenzione
D15331.01 MX700 and MX800 Administrator Guide CE8.0, NOVEMBER 2015.
www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.
86
Cisco TelePresence MX700 and MX800
Administrator Guide
Audio Output HDMI [2] Level
This setting only applies to MX800 Single.
Define the output level of the HDMI output connector, in steps of 1 dB.
Define the output level of the HDMI output connector, in steps of 1 dB.
Requires user role: ADMIN
Default value: 0
Default value: 0
Value space: Integer (-24..0)
Select a value between -24 and 0, in steps of 1 dB.
Audio Output HDMI [2] Mode
This setting only applies to MX800 Single.
Define if the audio channel on the HDMI output connector shall be enabled.
Define if the audio channel on the HDMI output connector shall be enabled.
Requires user role: ADMIN
Default value: Off
Default value: Off
Value space: Off/On
Off: Disable the audio channel on the HDMI output.
On: Enable the audio channel on the HDMI output.
On: Enable the audio channel on the HDMI output.
Audio Output Line [1..6] Channel
Define whether the Audio Line output is a mono signal or part of a multichannel signal.
Requires user role: ADMIN
Default value: Left
Default value: Left
Value space: Left/Mono/Right
Left: The Audio Line output signal is the left channel of a stereo signal.
Mono: The Audio Line output signal is a mono signal.
Right: The Audio Line output signal is the right channel of a stereo signal.
Mono: The Audio Line output signal is a mono signal.
Right: The Audio Line output signal is the right channel of a stereo signal.
Audio Output Line [1..6] Equalizer ID
Select the equalizer ID for the audio source that is connected to the output line.
Requires user role: ADMIN
Default value: 1
Default value: 1
Value space: Integer (1..8)
Set the equalizer ID.
Audio Output Line [1..6] Equalizer Mode
Define the equalizer mode for the audio source that is connected to the output line.
Requires user role: ADMIN
Default value: Off
Default value: Off
Value space: Off/On
Off: No equalizer.
On: Enable the equalizer for the audio output line.
On: Enable the equalizer for the audio output line.
Audio Output Line [1..6] Level
Define the audio level on the line output connector.
See the Audio Level table in the Physical Interface Guide for Cisco TelePresence SX80 for a
See the Audio Level table in the Physical Interface Guide for Cisco TelePresence SX80 for a
complete overview of the menu values represented in dB.
Requires user role: ADMIN
Default value: -10
Default value: -10
Value space: Integer (-24..0)
Select a value between -24 and 0, in steps of 1 dB.
Introduction
Configuration
Peripherals
Maintenance
System settings
Appendices
System settings