Cisco Cisco TelePresence MX700 Manuale Di Manutenzione
D15331.01 MX700 and MX800 Administrator Guide CE8.0, NOVEMBER 2015.
www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.
92
Cisco TelePresence MX700 and MX800
Administrator Guide
Cameras Preset TriggerAutofocus
The current position (pan and tilt), zoom and focus are stored with a preset. Use this setting
to determine if the camera should refocus or use the focus value that is stored with the
preset.
Requires user role: ADMIN
Default value: Auto
Default value: Auto
Value space: Auto/Off/On
Auto: Whether the camera refocuses or not when selecting a preset, depends on the
camera type.
Off: The focus value that is stored with the preset will be used. The camera will not
Off: The focus value that is stored with the preset will be used. The camera will not
refocus when selecting a preset.
On: The camera will refocus when selecting a preset. The focus value that is stored with
On: The camera will refocus when selecting a preset. The focus value that is stored with
the preset may be overridden.
Cameras SpeakerTrack Mode
This setting applies only to systems with a dual camera (speaker track).
The dual camera assembly consists of two cameras and uses an audio tracking technique
The dual camera assembly consists of two cameras and uses an audio tracking technique
that finds and captures a close-up of the active speaker. When a change of speaker is
detected, the system can switch automatically between the two cameras to always show
the best camera view. Refer to the Cameras SpeakerTrack TrackingMode setting for
different switching modes.
Requires user role: USER
Default value: Auto
Default value: Auto
Value space: Auto/Off
Auto: Speaker tracking is switched on. The cameras in the camera assembly behave
as one integrated unit that finds the active speaker and dynamically chooses the best
camera view.
Off: The cameras operate as two individual cameras. Speaker tracking is not used.
Off: The cameras operate as two individual cameras. Speaker tracking is not used.
Cameras SpeakerTrack TrackingMode
This setting applies only to systems with a dual camera (speaker tracking), and when
Cameras SpeakerTrack Mode is set to Auto.
The speaker tracking algorithm can react to changes in two modes, one faster than the
The speaker tracking algorithm can react to changes in two modes, one faster than the
other. The mode determines when the camera view will change to a new speaker.
Requires user role: USER
Default value: Auto
Default value: Auto
Value space: Auto/Conservative
Auto: Normal tracking mode.
Conservative: The camera view will change to a new speaker later than in Normal mode.
Conservative: The camera view will change to a new speaker later than in Normal mode.
Cameras SpeakerTrack ConnectorDetection Mode
Not applicable in this version.
Cameras SpeakerTrack ConnectorDetection CameraLeft
Not applicable in this version.
Cameras SpeakerTrack ConnectorDetection CameraRight
Not applicable in this version.
Introduction
Configuration
Peripherals
Maintenance
System settings
Appendices
System settings