Cisco Cisco TelePresence MX700 Manuale Di Manutenzione

D15119.06 MX700 and MX800 Administrator Guide TC7.3, OCTOBER 2015.  

www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved. 

104

Cisco TelePresence MX700 and MX800 

Administrator Guide

SIP settings

SIP ANAT

ANAT (Alternative Network Address Types) enables media negotiation for multiple addresses 

and address types, as specified in RFC 4091.

Requires user role: ADMIN
Value space: <Off/On>

Off: Disable ANAT.
On: Enable ANAT.

Example:

 SIP ANAT: Off

SIP AuthenticateTransferror

Not applicable in this version.

SIP ListenPort

Turn on or off the listening for incoming connections on the SIP TCP/UDP ports. If turned 

off, the endpoint will only be reachable through the SIP registrar (CUCM or VCS). It is 

recommended to leave this setting at its default value.

Requires user role: ADMIN
Value space: <Off/On>

Off: Listening for incoming connections on the SIP TCP/UDP ports is turned off.
On: Listening for incoming connections on the SIP TCP/UDP ports is turned on.

Example:

 SIP ListenPort: On

SIP PreferredIPMedia

Define the preferred IP version for sending and receiving media (audio, video, data). Only 

applicable when both Network IPStack and Conference CallProtocolIPStack are set to Dual, and 

the network does not have a mechanism for choosing the preferred IP version.

Requires user role: ADMIN
Value space: <IPv4/IPv6>

IPv4: The preferred IP version for media is IPv4.
IPv6: The preferred IP version for media is IPv6.

Example:

 SIP PreferredIPMedia: IPv4

SIP PreferredIPSignaling

Define the preferred IP version for signaling (audio, video, data). Only applicable when both 

Network IPStack and Conference CallProtocolIPStack are set to Dual, and the  network does 

not have a mechanism for choosing the preferred IP version. It also determines the priority of 

the A/AAAA lookups in DNS, so that the preferred IP version is used for registration.

Requires user role: ADMIN
Value space: <IPv4/IPv6>

IPv4: The preferred IP version for signaling is IPv4.
IPv6: The preferred IP version for signaling is IPv6.

Example:

 SIP PreferredIPSignaling: IPv4

SIP OCSP Mode

Not applicable in this version.

SIP OCSP DefaultResponder

Not applicable in this version.

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

System settings