Cisco Cisco TelePresence MX700 Manuale Di Manutenzione
D15331.02 MX700 and MX800 Administrator Guide CE8.1, APRIL 2016.
www.cisco.com — Copyright © 2016 Cisco Systems, Inc. All rights reserved.
149
Cisco TelePresence MX700 and MX800
Administrator Guide
Video Input Connector [4] DviType
The official DVI standard supports both digital and analog signals. In most cases the default
AutoDetect setting can detect whether the signal is analog RGB or digital. However, in some
rare cases when DVI-I cables are used (these cables can carry both the analog and digital
signals) the auto detection fails. This setting makes it possible to override the AutoDetect
and select the correct DVI video input.
Requires user role: ADMIN
Default value: AutoDetect
Default value: AutoDetect
Value space: AutoDetect/Digital/AnalogRGB/AnalogYPbPr
AutoDetect: Set to AutoDetect to automatically detect if the signal is analog RGB or
digital.
Digital: Set to Digital to force the DVI video input to Digital when using DVI-I cables with
Digital: Set to Digital to force the DVI video input to Digital when using DVI-I cables with
both analog and digital pins and AutoDetect fails.
AnalogRGB: Set to AnalogRGB to force the DVI video input to AnalogRGB when using
AnalogRGB: Set to AnalogRGB to force the DVI video input to AnalogRGB when using
DVI-I cables with both analog and digital pins and AutoDetect fails.
AnalogYPbPr: Set to AnalogYPbPr to force the DVI video input to AnalogYPbPr, as the
AnalogYPbPr: Set to AnalogYPbPr to force the DVI video input to AnalogYPbPr, as the
component (YPbPr) signal cannot be auto detected.
Video Input Connector [5] SignalType
Connector 5 can be used for either S-Video or Composite video input format. Use this
setting to configure which video format the BNC connector(s) are used for.
Requires user role: ADMIN
Default value: Composite
Default value: Composite
Value space: Composite/YC
Composite: Connector 5 is configured for composite video input. Only the BNC
connector that is labeled "Y" is used.
YC: Connector 5 is configured for S-Video input. Both BNC connectors ("Y" and "C")
YC: Connector 5 is configured for S-Video input. Both BNC connectors ("Y" and "C")
are used.
Video Input Connector [1..5] InputSourceType
Select which type of input source is connected to the video input.
Requires user role: ADMIN
Default value: Connector 1 and 2: camera Connector 3 and 4: PC Connector 5: other
Default value: Connector 1 and 2: camera Connector 3 and 4: PC Connector 5: other
Value space: camera/PC/mediaplayer/document_camera/whiteboard/other
camera: Use this when a camera is connected to the video input.
PC: Use this when a computer is connected to the video input.
mediaplayer: Use this when a media player is connected to the video input.
document_camera: Use this when a document camera is connected to the video input.
whiteboard: Use this when a whiteboard camera is connected to the video input.
other: Use this when the other options do not match.
PC: Use this when a computer is connected to the video input.
mediaplayer: Use this when a media player is connected to the video input.
document_camera: Use this when a document camera is connected to the video input.
whiteboard: Use this when a whiteboard camera is connected to the video input.
other: Use this when the other options do not match.
Video Input Connector [1..5] Name
Define a name for the video input connector.
Requires user role: ADMIN
Default value: Connector 1: "Camera 1" Connector 2: "" for single camera systems,
Default value: Connector 1: "Camera 1" Connector 2: "" for single camera systems,
"Camera 2" for dual camera systems Connector 3: "PC (HDMI)" Connector 4: "PC
(VGA)" Connector 5: ""
Value space: String (0, 50)
Name for the video input connector.
Introduction
Configuration
Peripherals
Maintenance
System settings
Appendices
System settings