Cisco Cisco TelePresence MX700 Manuale Di Manutenzione

D15331.02 MX700 and MX800 Administrator Guide CE8.1, APRIL 2016.  

www.cisco.com — Copyright © 2016 Cisco Systems, Inc. All rights reserved. 

174

Cisco TelePresence MX700 and MX800

Administrator Guide

Standard COM-port 

(9-pin, female)

Remove the left side 

cover to get access to 

the connectors.

Computer

Video 

system

USB

COM 

(9-pin, male)

COM 

(9-pin, male)

COM 

(9-pin, female)

RS-232 adapter

Serial cable

Serial interface (RS-232)

MX700 and MX800 have a standard COM-port for serial 

communication. Connect a standard 9-pin RS-232 serial cable 

to the COM-port. If the computer does not have a standard serial 

connector, you need an RS-232 adapter on the computer side.

The serial connection can be used without an IP-address, DNS, or 

a network.

Parameters:

•  Baud rate: Configurable. Default 115200 bps
•  Data bits: 8
•  Parity: None
•  Stop bit: 1

Video system settings

Serial communication is enabled by default. Use the following 

configuration to change the behavior:

For security reasons, you are asked to sign in before using the 

serial interface. Use the following setting to change the behavior:

We recommend using the default baud rate because the video 

system may give much feedback. Use the following setting if you 

want to adjust the baud rate.

Restart the video system when you have made changes to the 

serial port settings.

Introduction

Configuration

Peripherals

Maintenance

System settings

Appendices



Appendices