Cisco Cisco TelePresence MX700 Manuale Di Manutenzione

D15119.02 MX700 and MX800 Administrator Guide TC7.2, AUGUST 2014.  

www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved. 

39

Cisco TelePresence MX700 and MX800 

Administrator Guide

Managing the video system’s 

certificates

Certificate validation may be required when using TLS 

(Transport Layer Security). 

A server or client may require that your video system 

presents a valid certificate to them before communication can 

be set up.

The video system’s certificates are text files that verify the 

authenticity of the system. These certificates may be issued 

by a certificate authority (CA).

The certificates are listed as shown in the illustration to the 

right

*

. They can be used for the following services: HTTPS 

server, SIP, IEEE 802.1X and audit logging.

You can store several certificates on the system, but only one 

certificate can be used for each service at a time. 

If authentication fails, the connection will not be established.

Enabling and disabling certificates
Use the buttons to switch a certificate on or off for 

the different services.

You can also view a certificate, and delete a 

certificate using the corresponding buttons.

Contact your system administrator to obtain the 

following file(s):

•  Certificate (file format: .PEM)
•  Private key, either as a separate file or 

included in the same file as the certificate 

(file format: .PEM format)

•  Password (required only if the private key is 

encrypted)

The certificate and the private key will be stored in 

the same file on the video system.

Adding a certificate

1.  Click 

and find the Certificate and  

Private key file(s) on your computer. 

2.  Fill in the 

 if required.

3.  Click 

 to store the certificate 

on your system.

Navigate to: Configuration > Security: Certificates tab

*  

The certificates and certificate issuers shown in the illustration 

serve as examples. Your system may have other certificate(s).

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

Web interface